king_pinn_85's Profile

Login to post on King_pinn_85's Message Board

Posts 1 to 5 of 262 | View All Posts

• 

  konastinky888 wrote..
  on (28/10/2011 19:00)

  They have been fine so far. i had a firmer spring fitted too (a 400 up from 350) and ive not got the slower rebound settings right yet. i cant see which way to turn the red adjuster for slower, theres no indicator like on the upper one. ive just left it where it is for now and slowed the ending stoke only. it feels a bit weird at the moment.......

• 

  konastinky888 wrote..
  on (25/10/2011 17:26)

  im pretty sure the washers for those bolts should be on the inside. there is a very small recess for them to sit in on the back of the black moving piece either side of the seat tube. if the washers are on the outside, the bearing side, covering the bearings, i think its the wrong place. thats where mine were when i got the bike but ive swapped them to the inside.

• 

  konastinky888 wrote..
  on (24/10/2011 17:46)

  hey, is it the upper, most rearward bolts on the linkage thats got an issue? my washers were actually put on the wrong side when i got the bike! they are a right sod to get in, they go on the inside of the black linkage and they were on the outside on top of the bearings when i got it. i suspect the guy was getting fustrated maybe as its seriously fiddly if the bikes assembled. maybe if you undo all of the arm and do that one up first its easier.

• 

  konastinky888 wrote..
  on (23/10/2011 22:52)

  hi, ive had all my linkage bolts sorted @ the shop, seems fine now but i didnt get any worthwhile info on them sorry. i also got some white rims put on and im quite liking the look of them with the white frame, check it out if you want.

• 

  konastinky888 wrote..
  on (12/10/2011 08:37)

  Will do. I'm being a bit lazy here, I need to get mine sorted. It's doing my head in. The lower bolts are the worst for me. The top two are fine. Grab your frame and swingarm and try moving them sideways. Watch your links and see if it has any movement. Mine is visible when it's bad. My nuts are returning to freely moving on the axle bolt despite tightening them repeatedly. I might get it in the shop and get my rims swapped if I can.